STANDARD FEATURES:

• Handle can be installed in "up" or "down" position
• Detent release pressure adjustable from 1000 to 2000 PSI
• Relief valve adjustable up to 2750 PSI
• Pressure release detent spring center to neutral is 1200 PSI
• Not convertible from open center to closed center

STANDARD FEATURES ON THE LVS, LVT AND LVR SERIES

 - Economical monoblock construction of high tensile strength gray cast iron

 - Load check on each spool

 - Hard chrome plated spool

 - Adjustable cartridge relief

 - Open center, and power beyond available

 - 4 position float spool loader boom

 - 4 position regen spool for loader bucket

ADDITIONAL FEATURES ON LVT AND LVR SERIES ONLY:

 - Neutral position available

 - 5/16 - 18 UNC mounting holes on both top and bottom of valve

ADDITIONAL FEATURES ON LVS SERIES ONLY:

 - No face seals on spools

 - Molded rubber boot

 - Patent pending, dual spool lock joystick available

STANDARD FEATURES:

• Economical monoblock construction of high tensile strength gray cast iron
• Load check
• Hard chrome plated spool
• Adjustable ball spring relief
• Open center to closed center conversion available on some models

STANDARD FEATURES:

• Economical monoblock construction of high tensile strength gray cast iron with reversible handle
• Load check on each spool
• Hard chrome plated spool
• Optional 4 Position Float on 1st spool
• Differential poppet style relief, adjustable from 1500 to 3000 psi (low-pressure version adjusts from 500 to 1500 psi)
• Power beyond and closed center capability

NOTE:  2 & 3 Spool valves available.  Call our service team for availability - 715-748-5565

Features:

• Pressure release detent at end of retract stroke/detent in spool in position
• Relief set to 2,250 PSI
• Max tank port pressure 500 PSI
• Max operating temperature 180°F

STANDARD FEATURES:

• 1 - 6 spool mono-block
• 3500 PSI rating
• #8 SAE O-Ring in/out and work ports
• Interchangeable motor spool
• Load check
• Parallel cylinder spools
• Adjustable relief
• Enclosed handle design with a straight handle length of 5.8 inches
• Open center - field convertible to power beyond and closed center
• Low spool leakage (3 cc/min @1500 PSI)
• Hardened steel spools - spool seals in internal o-ring grooves

Features:

• 1-6 spool mono-block
• 4000 PSI rating
• #8 SAE O-Ring in/out and work ports
• Interchangeable motor spool
• Load check
• Parallel cylinder spools
• Adjustable relief
• Enclosed handle design
• Open center - field convertible to power and beyond & closed center not included
• Low spool leakage (3 cc/min @ 1500 PSI)
• Nominal flow 14 GPM

Features:

• Pressure release detent at end of retract stroke/detent in spool in position
• Relief set to 2,250 PSI
• Max tank port pressure 500 PSI
• Max operating temperature 180° F