Model RD-500 - Adjustable Flow Priority Divider
Brand: Prince
The RD-500 is an adjustable constant volume priority divider. This valve provides the same function as the Model RD-400 except the priority flow is adjustable from 2 gpm to 12 gpm. The priority flow is set using the adjusting screw and is then locked in place to maintain setting. This allows setting to be fine tuned in the field to the exact flow needed.
Specifications
Model RD-500P - Proportional Dividers with Adjustable Orifice
Brand: Prince
The RD-500P is a pressure compensated propertinal flow divider with one fixed and one adjustable orifice. On this valve, the divider ratio can be changed in the field.
Specifications
Models LT & LTF Line Check Valves
The Model LT & LTF Valves will operate satisfactorily when installed in any position. These valves may be used as Line Check Valves, permitting full flow of hydraulic oil in one direction only.
Models S & SM - Two-position Selector Valves
Models S & SM offer a simple method of directing system flow to one or the other of two separate lines. An example of this is the operation of two single-acting cylinders, independent of each other, with one three-way control valve. Since the S & SM spools are of open-crossover design, they should be shifted before pressure is applied.
Specifications
N Series Needle Valves
Economically designed for effective control of air and hydraulic fluids where frequent adjustment is not required.
Specifications
N1000 Series Hexagon Implement Slip Yokes
Style: N1000 Series
Used with 1-0170 Cross & Bearing. Replaces with Neapco 0600 Series
N1000 Series Hexagon Implement Yokes
Style: N1000 Series
N1000 Series Quick Disconnect Tractor Yokes
Style: N1000 Series
Used with 1-0170 Cross & Bearing. Replaces Neapco 0600 Series. Tractor end use only.
N1000 Series Rectangular Implement Slip Yokes
Style: N1000 Series
Used with 1-0170 Cross & Bearing. Replaces Neapco 0600 Series.
N1000 Series Rectangular Tube Implement Slip Yoke
Style: N1000 Series
Used with 1-0170 (1-0675) Cross & Bearing. Replaces Neapco 0600 Series,
N1000 Series Round Implement Slip Yokes
Style: N1000 Series
Used with 1-0170 (1-0675) Cross & Bearing. Replaces Neapco 0600 Series
N1000 Series Round Implement Yokes
Style: N1000 Series
Used with 1-0170 Cross & Bearing. Replaces Neapco 0600 Series. Implement end use only.
N1000 Series Round-Double Keyway Implement Yokes
Style: N1000 Series
N1000 Series Shaft Weld Implement Slip Yoke
Style: N1000 Series
Used with 1-0170 (1-0675) Cross & Bearing. Previously 0600 Series.
N1000 Series Spline Implement Yokes
Style: N1000 Series
N1000 Series Square Implement Yokes
Style: N1000 Series
N1000 Series Tube Weld Implement Slip Yokes
Style: N1000 Series
Used with 1-0170 (1-0675) Cross & Bearing. Replaces Neapco 0600 Series.
N44 Series Quick Disconnect Tractor Yokes
Style: N44 Series
Used with 3-0044 Cross & Bearing. Tractor end use only.
N44 Series Round Tube Implement Yokes
Style: N44 Series
Used with 3-0044 Cross & Bearing.
N44 Series Square Shaft Implement Yokes
Style: N44 Series
Used with 3-0044 Cross & Bearing.
N55 Quick Disconnect Tractor Yokes
Style: N55 Series
Used with 3-0045 Cross & Bearing. Tractor end use only.
N55 Series Round Implement Yokes
Style: N55 Series
Used with 3-0045 Cross & Bearing.
N55 Series Round Tube Implement Yokes
Style: N55 Series
Used with 3-0045 Cross & Bearing.
N55 Series Shaft Weld Implement Yokes
Style: N55 Series
Used with 3-0045 Cross & Bearing.
N55 Series Square Shaft Implement Yokes
Style: N55 Series
Used with 3-0045 Cross & Bearing.