Advanced Search
Showing products: 851 through 875 (981 total)

Plastic PTO Shields without Notch

Brand: G & G

Guards interchange with Metal or Plastic Guarded PTO's by G & G, Rockwell Standard, APC & Wesco.

Specifications

Note: Shield can be cut to fit 36" drives.

PolarSeal® Hose

Brand: Gates

Refrigerant hose. Designed to minimize permeation of R134a refrigerant and contamination of the system.

Specifications

Barrier: Nylon liner.
Cover: Black synthetic rubber (EPDM).
Recommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors, construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant.
Reinforcement: Two layers of spiral polyester.
Temperature Range: -22°F to +257°F (-30°C to 125°C)
Tube: Black, synthetic rubber (Chloroprene - Type A).

Polyair - General Purpose Air & Water Hose

Brand: Kuriyama

Style: K1131

General purpose air & water hose.

Specifications

Construction: Yellow cover with PVC compound
Reinforcement: Spiral polyester yarn with additional longitudinal yarns, which reduce elongation under pressure.
Standard Length: 500 feet: 1/4 - 1/2". 300 feet: 5/8 - 1"
Temperature Range: -15° F (-26° C) to 150° F (+66° C)
Tube: Black PVC compound.

Powdered Metal Bushings

American Made

Precision Splined Hubs

Designed for Char-Lynn hydraulic motors. Made from low alloy, high carbon steel.

Premo Flex® Air and Multi-Purpose Hose

Brand: Gates

Air and Multi-Purpose Hose.

Specifications

Coupling Recommendations: 19 (up through 1/2" only), 3 or 4, (up through 1/2" with 20 ferrules, up through 1" with bands), 1, 8, 14, 15, 72 Gates Power Crimp® or 75 Gates GLX®.
Cover: Type C2 (Modified Nitrile). Red.
Recommended For: Applications requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water, petroleum oils and lubricating oils. (to 212° F). Recommended for gasoline, kerosene, and fuel oil transfer only (to 120° F). Excellent weather and ozone resistance. Approved for breathing applications such a supplied air respirators.
Reinforcement: Synthetic, high tensile textile cord.
Temperature Range: -40°F to +212°F (-40° to +100°C) continuous service.
Tube: Type C (Nitrile). Black.

Prince Breathers

Brand: Prince

Prince Hydraulic Cylinder Breathers

Prince Butt End

Brand: Prince

Prince Clevis

Brand: Prince

Prince Clevis Pins

Brand: Prince

Prince Cylinder Holding Valve

Brand: Prince

Specifications

Features: Helps eliminate drifting and/or raising of implement wings
Counterbalance valve prevents free fall of cylinders thus preventing cavitation, air ingestion, and jerking
Prevents chatter when all air is completely bled
Locks ports to give a stiff hydraulic system and prevent lurching from side to side
Two cartridge valve block prevents bleed down seen in 3 cartridge valve systems
Can be used with single non-rephrase cylinders. Hookup may vary from circuit above
Valves available: HC-V-AA21 (use with lower flows, typically up to 15 GPM) and HC-V-AA22 (use with larger flows, typically over 12-15 GPM and up to 30 GPM)

Prince Gland End Cap

Brand: Prince

Prince Hair Pin Clips

Brand: Prince

Used on all Prince clevis pins

Prince Hand Pump

Brand: Prince

Prince Hydraulic Cylinder Repair Kit

Brand: Prince

Prince Hydraulic Cylinder Repair Kit

Prince Model SV

Brand: Prince

STANDARD FEATURES:

· 1-10 sections per valve bank with load checks on each section

· Hard chrome plated spools

· Compact construction, reversible handle and power beyond capability

· Enhanced metering section available in both the high and low sections

· Differential poppet style relief, adjustable from 1500 to 3000 psi (low pressure version available - 500 to 1500 psi)

                                                        · Mid-Inlet and lock valve section available

                                                        · Flow control inlet

Specifications

Flow Rating: 12 GPM (nominal)
Max Operating Temp: 180° F (foot mounting)
Maximum Operating Pressure: 3000 psi
Maximum Tank Pressure: 500 psi

Prince Piston

Brand: Prince

Prince Hydraulic Cylinder Piston

Prince Piston Rod

Brand: Prince

Prince Hydraulic Cylinder Piston Rod

Prince PMC Stroke Controls

Brand: Prince

Thread On

PTO Guards & Bearing Kits

* Dimensions in parenthesis ( ) denote bearing groove O.D. of inner yoke/tube assembly versus bearing groove O.D. of outer yoke/tube assembly.

Specifications

How To Order: Bearing part numbers (56-prefix) are listed first with it's coordinating shield number (69-prefix) listed in the far right column. For ordering, the shield part numbers are listed at the bottom, after the bearing numbers.

Push-Pin Type P.T.O Adapter

Brand: Hub City

-Quick release extension adapter -To 75 H.P.

Specifications

Note: Repair Kit available

PVC General Purpose Suction & Transfer Hose

Brand: Kuriyama

Low temperature suction applications, liquid manure handling, septic tank cleaning and dry fertilizer broadcasting. Good cold weather properties. Full vacuum rating.

Specifications

Construction: Black HMW PVC convoluted construction, smooth bore allows unrestricted material flow.
Note: We carry Double Bolt Clamps for this product! See Hose Clamps.
Standard Length: 100 feet.
Temperature Range: -40° F to +150° F (-40° C to +66° C)

Quad Cord Stock

Produce O-Rings in your shop or on the job.

Quad Rings

The Q4 Series Quad Ring is made of the Buna-N compound for a wide range of sealing application.  Ideal for use with all petroleum-based hydraulics oils and water.  It performs at pressures beyond 2,000 PSI.  The four lobed cross section provides a tough seal.  The main seal is with the center lobes, with the two side lobes acting as a secondary or back-up seal.

Quick Links Chain Connectors

Zinc Plated

Showing products: 851 through 875 (981 total)