Hydraulic Components - Mid-States Equipment

2500 PSI Heavy Duty - Universal Mountings PISTON RODS are sized to operate under full pressure without danger of buckling through strokes of 8-16 inches. On longer strokes maximum pressure should not be used at full extension.

Specifications

Features: Honed tubing

• Welded, heavy-duty construction

• Chromed, ground & polished rod

• Ductile iron piston & gland

• Crosstube end fittings with grease zerks

• Urethane u-cup and wiper in gland

• O-Ring with backup washers & cast iron ring piston seals

• Truarc snap ring gland retainer

• Standard color is black

• Rod seal is a urethane u-cup

• Double acting

Prince Royal Line Welded Cylinders

Welded Hydraulic Cylinders

Click for details and to order

Brand: Prince

2500 PSI Heavy Duty - Universal Mountings

Piston rods are sized to operate under full pressure without danger of buckling through strokes of 8-16 in. On longer strokes maximum pressure should not be used at full extension.

Specifications

Features: Honed tubing

• Welding heavy duty construction

• Chromed, ground & polished rod

• Ductile iron piston & gland

• Crosstube end fittings with grease zerks

• Urethane u-cup and wiper in gland

• O-Ring with backup washers & cast iron ring piston seals

• Truarc snap ring gland retainer

ASH Series Shuttle Valve

Shuttle Valves

Click for details and to order

Designed to be used in a pilot system to select the higher of two pilot pressures.

Specifications

Construction: Rugged, all metal construction - no plastic parts.

Brass Ball Valves

Click for details and to order

Forged brass bodies, chrome-plated brass balls & plated steel handles.

C-Series Check Valves

Check Valves

Click for details and to order

Designed for control of hydraulic & pneumatic systems and allow full-flow in one direction.

Specifications

Features: Efficient in-line design provides high flow capability with low pressure drop.

• Soft seat poppet for leak-free service.

• Maximum operating pressure 1500 psi brass & 5000 psi steel.

Carbon Steel Ball Valves

Click for details and to order

Carbon Steel construction. Full port, except 2" heavy-duty handles High Pressure full flow port

2-1/2" Face, 1/4" NPT Bottom Stem (Dry)

Specifications

Accuracy: +2% OR +1/6% of full scale

Features: Range: From 60 PSI to 10,000 PSI

How To Order: The maximum operating pressure should not exceed 75% of full scale range.

Temperature Range: Maximum: 80º C (176º F)

FFG Series Needle Valves

Needle Valves

Click for details and to order

Ideal for applications requiring fine metering and shut-off.

Specifications

Features: Maximum operating pressure 10,000 psi

• Designed for use with air, oil, water, steam

• Machined for carbon, 303 or 316 stainless steel

• Maximum operating pressure 10,000 psi

Filter Gauges

Hydraulic Filters

Click for details and to order

Features:

1 1/2" steel case
Brass stem, 1/8" center back
Easy to read color-coded gauge to ensure proper servicing

Flow Meter

In-Line Flow Rate Monitors

Click for details and to order

Other types and sizes available. Also available are Pneumatic Flow Monitors, Flow Rate Alarms, Flow Rate Transmitters and Flow Analyzers.

Specifications

Design: Designed as a hydraulic service tool, this rugged and reliable monitor will provide years of maintenance free performance. Exterior is also weather tight for use outdoors and/or on sytems where washdown are required.

Material: Select from aluminum, brass or stainless steel.

Note: Good Viscosity Stability. A thin (0.03"), sharp-edged, orifice provides excellent stability of readings to a minimum of 500 SUS.

• Reverse Flow Capability-an option not found in most rotameters and other variable area meters.

Operations: This magnetically coupled follower allows high pressure operation to 6000 psig and use with opaque liquids.

Porting: Twenty-three different ports available. Standard selection of NPT, SAE and BSP permits system design versatility.

Flow Meter Tester

In-Line Flow Rate Monitors

Click for details and to order

A complete troubleshooting system which includes a flow meter, needle valve, and gauge. Used to diagnose faults in hydraulic circuits, determine horsepower and test for component wear and cylinder leakage.

Hydraulic PTO Pumps - Aluminum Center Housing

PTO Pumps

Click for details and to order

Brand: Prince

Prince PTO pumps are specifically designed for PTO driver operation on all sizes of farm tractors. No additional gear box is required. Pumps are mounted by sliding the internally splined pump onto the PTO splined shaft and restraining rotation with a torque arm.

Hydraulic PTO Pumps - Cast Iron Center Housing

PTO Pumps

Click for details and to order

Brand: Prince

Prince PTO pumps are specifically designed for PTO drive operation on all sizes of farm tractors. No additional gear box is required. Pumps are mounted by sliding the internally splined pump onto the PTO splined shaft and restraining rotation with a torque arm.